Biomedical Polymer Materials Polybutylene Succinate Bio-based Polymer Materials
Polybutylene succinate (PBS) is a thermoplastic resin and has good processing properties. It can be processed on ordinary processing equipment. The processing temperature range is 140~260°C. The material must be dried prior to processing. The moisture content must be below 0.02%.
Polybutylene succinate (PBS) can be processed by injection molding, blow molding, blown film, blister, lamination, foaming, spinning and other molding methods.
Polybutylene succinate (PBS) is a polymer with good biodegradability. Compared with polylactic acid, polyhydroxyalkanoate, polycaprolactone and other biodegradable plastics, PBS is relatively low in price. Excellent mechanical properties, good heat resistance, heat distortion temperature close to 100 °C.
Advantages of the product
Based on the bio-based succinic acid produced by our company as a raw material, the bio-based PBS produced by the processes of esterification and polycondensation is a bio-based polymer material encouraged and advocated by the country. With the disposable products produced by this product, complete biodegradation can be achieved by microorganisms in nature. At present, EU countries, such as France and the United Kingdom, have successively banned the use of non-biodegradable materials and forced the use of biodegradable materials. Therefore, bio-based PBS will become a popular degradable material.
Polybutylene succinate (PBS) can be used as garbage bags, packaging bags, cosmetics bottles, various plastic cards, baby diapers, agricultural materials, and drug release carrier matrix; there are other related to environmental protection Kinds of plastic products, such as landscaping nets and membranes. Polybutylene succinate (PBS) can be used for packaging, tableware, cosmetics bottles and pharmaceutical bottles, disposable medical supplies, agricultural films, pesticides and fertilizers sustained-release materials, biomedical polymer materials and other fields.
Product standards and parameters
|2||Melting point Tpm||℃||105~116|
|3||Melt mass flow rate (MFR)||Nominal value||g/10min||≤10||10~20||20~40||40~100||≥100|
|4||Water content||%||≤0.1 (method A and method B); ≤0.2 (method C)|
|6||Color value||L value||—||—||≥75|
|A value||Nominal value||—||≤5|
|B value||Nominal value||—||≤11|
|7||Tensile Strength||MPa||≥25.0|| || |
|8||Nominal strain at break||%||≥150|| || |
|9||Bending strength||MPa||≥25.0|| || |
|10||Flexural modulus||MPa||≥400|| || |
|11||Izod notched impact strength||KJ/m2||≥4.0|| || |
|12||Deflection temperature T||℃||≥75|| || |
|13||Intrinsic viscosity||dL/g||≥1.75||1.63~1.75||1.37~1.63||1.22~1.37|| |
|15||Biological analysis rate||%||≥60|